GemmaCert Customer Portal provides several functions for batch statistical analysis and graphical display. These functions can be used to track batch growth progress, analyze plant maturity, and determine batch homogeneity and assist in planning towards next season.
Yes. You can travel with your GemmaCert device. Make sure to handle carefully during transit. We recommend the GemmaCert protective case for transport available online at the GemmaCert Shop.
GemmaCert contains delicate components. Be sure to place it on a stable, flat surface and avoid moving it abruptly. Avoid placing on vibrating surfaces, e.g. in proximity of air-condition, compressor, etc.
GemmaCert is licensed by the Israel Ministry of Health to conduct medical cannabis research and development on its premises at is dedicated in-house laboratory.
GemmaCert is CE and TÜV Rheinland certified, a testament to our high standards and safety.
GemmaCert devices are compliant with EMC, Disposal (RoHS), and Safety Standards. These have been validated by an independent Certification, Testing and Inspection body, accredited to ISO/IEC 17065, ISO/IEC 17025 and ISO/IEC17020.
The GemmaCert analytical laboratory, which gathers all the data for the reference database, is ISO 17025 certified covering the general requirements for the competence of testing and calibration laboratories. ISO 17025 is the key standard for an analytical laboratory.
Your trust is a top priority. We take privacy extremely seriously and adopt many measures to minimise the risks. GemmaCert cloud-based servers are hosted by AWS, which complies with ISO 27018, a code of practice that focuses on protection of personal data in the cloud.
AWS is also compliant with the European Union’s General Data Protection Regulation (GDPR).
You do not need any special skill set to operate GemmaCert. We provide a comprehensive free-of-charge online onboarding session to walk you through your new GemmaCert device and best practices for operation.
GemmaCert attributes high importance to customer service and support. Our technical support team is always ready to answer any inquiry related to any GemmaCert product or service.
You can email GemmaCert Customer Service any time at [email protected] and a GemmaCert representative shall contact you as soon as practicable.
If you are a cannabis industry professional, then you need to be sure that your products are consistent, safe, effective, and predictable. For that you need to adopt in-house testing and GemmaCert is the ideal solution for cannabis potency and composition analysis.
GemmaCert devices are carefully assembled by hand at the company site in Israel by traditional techniques and cutting-edge technologies. GemmaCert devices are crafted thanks to carefully curated expertise that is continually improved over time with great care.
Each device is thoroughly tested in-house before being approved for shipment.
Unless otherwise agreed, you shall be charged a $200 restocking fee for the return of your device. Processing returns is costly and once a device is returned it can no longer be sold as new. Before being approved for sale as a refurbished device, the device needs to undergo comprehensive testing. Electronics companies customarily charge between 10 and 25 percent of the item’s price for a return, with 15 percent as the most common amount quoted.
Both analytical methods provide results based on estimation. The HPLC does so by using chemical reference standards. NIR spectroscopy applies a reference database.
Variance between HPLC results is also common. Results are subject to the analytical method applied, device calibration, sample preparation, operator skills and results interpretation. Consequently, HPLC performance is exposed to human error.
The GemmaCert Team is working continuously on new analytical capabilities and these will be released from time to time, most likely by over-the-air software updates.
Results assume 0.877 conversion ratio from the acid from of THCA and CBDA into the active form of THCΔ9 and CBD, respectively. Accordingly, totals are calculated as percentages of total weight using formula below.
%Total THC = 0.877× (%THCA) + (%Δ9THC)
%Total CBD= 0.877× (%CBDA) + (%CBD)
Note that some cannabis products on the market misstate totals as plain summation, disregarding conversion ratio.
Note that GemmaCert results are percentages of total weight whereas HPLC results are percentages of dry weight.
GemmaCert repeatability for:
Ground is up to 0.6%
Flower is up to 1.5%
Therefore, if you are eager to find accurately the composition of a particular flower, we recommend averaging results across several analyses.
Yes, GemmaCert is the only device on the market which can analyse cannabis by 100% Non-Destructive Means. There is no need for samples be homogenized via grinding to reduce potential measurement errors.
Dry flower buds, ground material (biomass), and crude extract.
GemmaCert users have experimented analyses of concentrates produced by other than Ethanol extraction methods. Some have reported satisfactory results, e.g. for hashish. GemmaCert appreciates customer creativity and is glad to engage with inquisitive users to explore applicability. However, performance for concentrates produced by other methods is not warranted at this time.
The patented technology combines near infrared spectroscopy, image analysis and motion mechanics, while the analysis is conducted by applying machine learn based on sophisticated algorithms.
It is very important to have tools that help industry to have quick answers. GC is unique in the cannabinoids field as it doesn’t need any special technical requirements to operate it or any type of sample preparation before analysis (beyond drying and grind).Ana Matias, Lead Scientist – Clever Leaves
I wanted a reliable tool to test the correct levels of THC and CBD in our cannabis flowers. I love the App – easy to use and very helpful.Youri Florijn, Manager – Prix d'Ami
We test all of our hemp genetics with GemmaCert starting 30 days before expected harvest date. This helps us for THC risk mitigation and optimize CBD levels. Also turns out that the soils and actual weather has a big influence on hemp biomass and cannabinoid production.Alan Boyce, Executive Chaiman at Materra Hemp Farming Company (California, USA)
Our team uses GemmaCert devices in all of our facilities for various purposes. For example quick pheno-hunting testing, tracking how grow conditions effects cannabinoid development, and determining optimal harvest times. We have compared results to our in-house HPLC and GemmaCert is very accurate.Michael Waisman, Head Agronomist at Tikun Olam (Israel)
We have racked up well over a thousand analysis with the GemmaCert in just a few months. Very accurate and reliable. Should be in every LP!Daniel Gagne, IPM Supervisor at Verdelite (Canada)
This is a great instrument. For pheno-hunting, ROI on this unit is about 3 days. Great support as well!Stewart Maxwell, Crop Consultant at Xylem Horticulture (Canada)
We have used GemmaCert to generate our development documentation. Fast, easy and reliable measurements of individual flowers -secures maximum knowledge.Medican, Linda Bech Pihl, QA Specialist, M.Sc Chemical Engineering and six sigma black belt
We use cookies to ensure that we give you the best experience on our website.OkPrivacy policy